Our cell fenders are some of the most popular fenders in use today. The unique, circular shape grants this particular fender superior stability compared to similar large fenders. This product is available with outer diameter sizes ranging from 650mm to 3000mm. We can supply a variety of lengths in order to ensure you get the appropriate protection to match your application.
Cell fenders offer some of the highest energy absorption to weight ratio of any fenders. This enables you to use them in both large and small scale applications, which makes them highly versatile. The circular shape enables our fenders to distribute impact pressure and weight easily. This not only provides superior impact absorption, it also helps to prolong the life of the fender.
Unlike many compression fenders, cell fenders feature the lowest compression performance change. This ensures that our fender is able to maintain impact absorption and resistance rates regardless of the weight of the vessel.
Customers can also install our UHMW–PE–sliding fender plates to further increase the life expectancy of the fender. These plates significantly reduce friction as well as putting less pressure on the hull of the ship.
Good shear force resistance
Can support large panels
Highly durable design
Ideal for low pressure systems
Lower hull pressure
Multi direction dispersion of energy
Superior life expectancy
Cell Fender Size Drawing
Cell Fender Size Table
Size units – mm
Weight units – kg
High Quality Material
We manufacture our cell fenders from a high quality marine rubber compound. It was important to use a highly durable compound, which could still compress under pressure. This is due to the wide range of ships and sea vessels which will likely come into contact with the fender.
Our marine compound provides good tensile strength and tear resistant properties. This enables our fenders to be in constant use without fear of warping or deterioration. The addition of the UHMW-PE sliding plates can also greatly increase the life of the fender.
Our fenders are also resistant to salt water, weathering, UV as well as Ozone damage. This greatly reduces any potential maintenance while ensuring consistent performance.
FENDER MARINE Cone fenders are an improved version of Cell type Fender recently introduced and recommended for all type of applications including high tidal variation sites. This advanced feature of lesser height of fenders improves material handling capabilities of Deck / Vessel Cranes which reduces overall cost of the project. Due to the geometrical shape of the fenders it can deflect more and it can absorb more energy from any direction.
Maintaining reaction force, but doubling energy absorption, can be achieved by using two identical cone fenders in a back-to-back arrangement. In order to distribute the reaction force, cone fenders are typically supplied with large fender panels, which keep the hull pressure low. Cone have good energy absorption to reaction force ratio (E/R); Integrated and fully-embedded fender flanges make assembly & installation simple; Good shear force resistance due to the large diameter of the fender flanges; large fender footprint with good force distribution could lead to relative light panel construction.
Fender Marine cone rubber fender adopts tapered rubber with a steel frame at the head. This new structural design increases the design compressive deflection from 52.5% to 70%, on the condition that the reaction force is not increased. This type of rubber fender lightens the structure of a dock and thus reduces the construction cost of a dock. Therefore, a cone rubber fender, one of the best rubber fenders, is an ideal replacement of super cell rubber fenders.
FENDER MARINE cone rubber fender is suitable for the docks that requires low reaction force and high energy absorption, the docks that requires low surface pressure of the ship’s panel, off-shore open berths and large docks like oil wharf and container terminal, as well as all places that are suitable for super cell marine fender.
Attn.Pls We are supplier of Natural Rubber Mat with Tyre Fabrics Raw-Materials for making Airbags.
Application of Cell and Cone Rubber Fenders
Oil and LNG facilities
RoRo and cruise terminals
General cargo terminals
• bridge sections
Q1. What is your terms of packing?
A: Generally, we pack our goods in inside environmental plastic bags and outside cartons. If you have legally registered patent,we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: usually if the order money less than $1,000, need to pay for full money before producing, if it is more than $1,000, need that T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages,enough to keep your products qulity,great thanks! before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU….etc,main according to customer’s requirement,thanks!
Q4. How about your delivery time?
A: Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply free sample if we have ready parts in stock, but the customers need to pay the courier cost.great thanks for your understanding.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery,keep the quallity,don’t worry!
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them no matter where they come from.